ASTM Switchboard Matting - 91cm x 22.8m

High quality ribbed non-conductive switchboard matting made from a PVC compound, providing the worker with protection from being grounded, thereby eliminating the possibility of electrical shock. The corrugated saw-tooth top surface provides increased traction and is easy to keep clean.

Features

• Non-conductive PVC compound, designed to provide insulation and protect workers from electric shock
• Slip resistant ribbed surface
• Each square inch of matting tested in conformance with ANSI/ASTM D-178 specifications
• Class 2 - Dielectric Strength 30,000 volts
• Proof test 20,000 volts
• Recommended maximum usage 17,000 volts
• Also available with a yellow border
• Recommended for distribution boards, switchgear, sub-stations, transformers, generators, electricial workbenches.
• Mats can be cut to bespoke sizes
• Mats can be cut to length
• Suitable for use by wheeled trolleys

Specifications

• Overall height 6.4mm
• Wear resistant surface to Level 2
• Anti-fatigue protection to Level 1
• Slip resistance Level 2
• Electrical non-conductive
• HV Electrical non-conductive

Tests

• Compression deflection U.S. 1.4 kg/cm2 2.8 kg/cm2 
• Foam battery ASTM D3574 
• Abrasion resistance ASTM D3884-01 500 Cycles 1000 Cycles 
• Static coefficient of friction ASTM C1028-96 
• Breaking load ASTM D412 
• Elongation ASTM D412 317% 
• Electrical proof ASTM D178-01 Min 20.000 V for 1 min Pass 
• Dielectric strenght ASTM D149 Min 30.000 V Pass 
• Oil resistance ASTM D471 Pass 
• Graves tear strength ASTM D 1004 2505 PI 
• Hardness ASTM D2240-02 91 Shore A 
• Anti-slip DIN 51130 and BG-RULE BGR181 
• Electrical Resistance - IBM ASTM F-150 50% Humidity 100 volt RG 6.6 X 109 Ω 
• Static decay 101B/NFPA 99 Pass 
• Flexibility test FED-STD-501 Pass 
• Dimensional stability test ASTM D1204 0.04 in/ft
• Critical radiant flux ASTM E-648 
• Fire retardancy DIN4102 EN 13501-1 
• Flammability test ASTM D2859 Pass 
• Flame resistance ASTM D178 Combustion time 4 min (1.9 in)